Gas Mass Flow meter (Stainless Steel)

Gas Mass Flow meter (Stainless Steel)

SKU CMS Stainless Steel
UOM Each

Azbil CMS Stainless Steel / 316 Stainless Steel Gas Mass Flow are the ultimate compact mass flow meters, with both high functionality and wide measurement range of 100:1 allows the detection of minute gas leak flows. A broad selection of gas mass flowmeters is available to meet any application and price range. The meters facilitate industrial gas flow rates management and consumptions allocation by department; experimentation and research. Integrated flow-rate management function supports unit gas consumption control. Applications include: Air, Nitrogen, Oxygen, Argon, Carbon Dioxide, City Gas 13A (45/46MJ), Methane, Propane and Butane. Straight pipe length not required if pipe size is uniform. the meter can even be connected to an elbow pipe, allowing for easy design of pipe layout. Corrosive gases cannot be measured. Low tolerance for foreign matter deposits (filter installation required). *The flow meter can also used for some gases not listed by means of the gas type conversion factor function. For details, contact Azbil North America.


Included Products

CMS0002BSRN200000

CMS0002BSRN200000

$968.00


CMS0002BSRS200100

CMS0002BSRS200100

$1,088.00


CMS0005BSRN200000

CMS0005BSRN200000

$968.00


CMS0005BSRN2000D0

CMS0005BSRN2000D0

$992.00


CMS0020BSRN200000

CMS0020BSRN200000

$847.00


CMS0020BSRS200100

CMS0020BSRS200100

$967.00


CMS0050BSRN200000

CMS0050BSRN200000

$847.00


CMS0050BTSN200000

CMS0050BTSN200000

$1,209.00


CMS0050BTSN2000Y0

CMS0050BTSN2000Y0

$1,389.00


CMS0050BTUE200100

CMS0050BTUE200100

$1,449.00


CMS0200BSRN200000

CMS0200BSRN200000

$1,089.00


CMS0200BTTN200100

CMS0200BTTN200100

$1,511.00


CMS0500BSRN200000

CMS0500BSRN200000

$1,936.00


CMS0500BSRN2000D0

CMS0500BSRN2000D0

$1,960.00


CMS9500BSRN200000

CMS9500BSRN200000

$968.00


CMS9500BSRN2000D0

CMS9500BSRN2000D0

$992.00


Details

Azbil CMS Stainless Steel / 316 Stainless Steel Gas Mass Flow Meters are equipped with Azbil Corporations µF (Micro Flow) sensors, which can detect even the slightest gas flow. The flow meters. provide mass flow measurement of gas with high speed 2 m response that is unaffected by changes in pressure and temperature. The CMS incorporates a microflow sensor built with silicon micromachining and thin-film technologies. The Symmetric structure measures reverse flow as well. High repeatability, accuracy ± 3% rdg. 100:1 measurement range, pipe size (B) 1/4" and 1/2", flow rate range 2 L/min to 500 L/min depending on the model. Operating temperature 14 °F (-10 °C) to 140 °F (60 °C). Operating pressure –0.07 to 1MPa. Sampling time 100 ms ± 20 ms. Analog output signals can be switched among 0-5V, 1-5 V and 4-20 mA output, selectable using keys on the CMS body. Gas-contracting parts: 304 stainless steel or 316 stainless steel (depending on the model), Flourorubber. RS-485 option available for 316 stainless steel models. Inspection results and traceability certificate models available. CMS functions include instantaneous flow rate indication, totalized or reverse-totalized flow display, event output, totalizer pulse output, totalized flow reset input, output scaling, gas type switching, etc. for a variety of applications. CMS gas flowmeters are CE approved.

Documents

Datasheets
Owner's Manuals