Photoelectric Sensors & Switches - Self-Contained - Ultraminiature Photoelectric Switches with Self-contained Amplifier - Limited diffuse scan, infrared LED, scanning distance 30 ± 5 mm, supply voltage 10.8 to 26.4 VDC, output mode NPN open collector, operation mode light on, sensitivity adjustment 1-turn control, pre-leaded. Standard target object 10 x10 cm KODAK 18 % white paper used. Differential travel about 25 %. Current consumption 20 mA maximum. Output switching circuit: 80 mA max. (resistive load), Voltage Drop: 1V max. (at 80 mA switching circuit), Output dielectric strength: 26.4 V. Response time 1 ms max. for operation and recovery. Dielectric strength non-controlled sections: 1,000 Vac (50/60 Hz) for 1 minute, controlled sections: 500 VAC (50/60 Hz) for 1 minute between case and electrically live metals. Protection IP40 (IEC standard). CE marked
Azbil HPJ-□□□ Ultraminiature Photoelectric Switches with Self-Contained Amplifier with Limited Diffuse Scan are fingertip-size, 30 x 12 x 8 mm. Long distance scanning 30 ± 5 mm. Set of various slit attachments (six types) available (Model HPJ-U01, sold separately).
All the Azbil HPJ-□□□ Ultraminiature Photoelectric Switches with Self-Contained Amplifier series pre-leaded and have supply voltage 10.8 to 26.4 VDC, a response time of 1 ms max. for operation and recovery. Ambient light immunity - incandescent lamp: 3,000 lx max., sunlight: 10,000 lx max. Operating temperature range -4 °F (-20 °C) to 122 °F (50 °C). Humidity range 35 to 85 % RH (condensations not allowed). Insulation resistance 20 MΩ min. (by 500 VDC megger). Vibration resistance 10 to 55, 1.5 mm peak-to-peak amplitude, 2 hrs. in X, Y, and Z directions. Shock resistance 500 m/s2 3 times in X, Y, and Z directions. Reveres connection protection circuit. IPI40 (IEC standard) protection and reverse connection circuit protection. CE Marked