Gas Flow Measurement and Control - Air Mass Flow Sensor - Flow range 0 to 3 L/min*, gas type air and nitrogen. Gas must be dry not containing and corrosive components (chlorine, sulfur, acid). The gas must also be free of dust or oil mist. 5 ms max. response, measurement accuracy ± 5% FS max., repeatability ± 7% FS max., CE marked.
* Flow Range: Volume flow converted to the conditions of 20 °C and 1 atm.
Azbil MCS100A104 Air Mass Flow Sensors are compact, fast response air mass flow sensors. With its combination of thermal MEMS sensor and a flow path with low pressure loss, the MCS can measure air flows under 10L/min with a fast 5 ms response and is unaffected by changes in pressure and temperature. The sensor is located in the pipe wall and detects slight flow rate differences. Any mount position is okay, and there is no need for a straight pipe section with low pressure loss (models with built in flow rectifier). Only weighs 9 g. Pipe size 1/8” (MS female [brass insert]). Flow range 0 to 3 L/min. The MCS100A1004 accuracy ± 5% FS max. repeatability ± 7% FS max., operating temperature 32°F (0°C) to 122°F (50°C) for both ambient and gas temperatures. Operating humidity 10 to 80% RH, no condensation allowed. Operating pressure –100 to 200 kPa (range for assured pressure characteristics: -70 to 200 kPa). Pressure resistance 300 kPa. 1-5V output (non-linear). Low power consumption (12 mA max. at 24 Vdc). CE marked.