Panel Mount Mass Flow Controller

Panel Mount Mass Flow Controller

SKU MPC
UOM Each

Azbil MPC Panel Mount Mass Flow Controllers are small and light. Compact (front panel: 48mm square x 72.7 mm deep) and light. (300 g) mounting body contains a built-in miniature proportioning valve, enabling full-automatized flow control. The controller offers easy operation and easy mounting even for the purgemeter users. Applicable gases include: Air/Nitrogen, Argon, Carbon dioxide*. Gas must be clean and dry, without corrosive components such as chlorine, sulfur and acid, and without dust or oil mist. Controllers can be installed on the front of a panel. Straight run pipe length not required. *The air/nitrogen is set as a factory setting. The controller can also be used for argon and carbon dioxide gases by changing the setting of the gas type selection in the function setup.


Included Products

MLP200A100

MLP200A100

$600.00


MPC0002BBNSP10000

MPC0002BBNSP10000

$1,200.00


MPC0002BBRN000000

MPC0002BBRN000000

$960.00


MPC0002BBRN010000

MPC0002BBRN010000

$1,080.00


MPC0002BBRN020000

MPC0002BBRN020000

$1,200.00


MPC0005BBRN010000

MPC0005BBRN010000

$1,080.00


MPC0020BBRN010000

MPC0020BBRN010000

$1,080.00


MPC0020BBRN020000

MPC0020BBRN020000

$1,200.00


MPC9200BBRN410000

MPC9200BBRN410000

$1,200.00


MPC9500BBNSP10000

MPC9500BBNSP10000

$1,260.00


MPC9500BBRN0100Y0

MPC9500BBRN0100Y0

$1,260.00


MPC9500BBRSW10000

MPC9500BBRSW10000

$1,200.00


Details

Azbil MPC Panel Mount Mass Flow Controllers are small and light. Compact (front panel: 48mm square x 72.7 mm deep) and light. (300 g) mounting body contains a built-in miniature proportioning valve, enabling full-automatized flow control. The controller incorporates a thermal micro-flow sensor developed by Azbil Corporation and an extremely compact proportional solenoid valve. The controller offers easy operation and easy mounting even for the purgemeter users. Once you set the flowrate set point, all the operations are automatically done by the MPC. External set point change (from PLC to host systems) is easy, using optional analog setting input function or communication function (RS-485). The MPC Flow Controllers µF (Micro Flow) sensor with high speed (1 s), high accuracy (2% FS) flow control is unaffected by pressure and temperature fluctuations. There are a variety of functions available as standard offering equipment cost reduction. These include: Multi set point function, gas type switching, operation mode switching, slow start function, flowrate integration function, alarm indication/output/automatic shut-off, event indication/output, "OK" indication/output, Automatic shut-off function, valve drive output monitor and standard support of the loader communication. Pipe size (B) 1/8”. Flow range 0.5 L/min to 20 L/min. Accuracy ±2% FS, operating temperature 14°F (-10°C) to 122°F (50°C). Operating humidity 10 to 90% RH (non-condensing).Operating differential pressure 50 to 3000 kPa psi. Smart Loader connection (standard), RS-485 communication (option). Power supply 24V dc. CE approved.

Documents

Datasheets
Owner's Manuals

Accessories

MLP200A100

MLP200A100

$600.00