Micro Flow Vortex Gas Flow Meter
Micro Flow Vortex Gas Flow Meter
SKU
MVF
UOM
Each
Azbil MVF□□□□□□□011□□□□0 offer a wide measurement range. Mass flow, temperature, pressure and density reading from a single installed device - reduces initial cost, there is no need to install separate temperature/pressure compensation devices. The flowmeters are Ideal for energy conservation management for flow rate management and per-building consumption management of fuel gas, various industrial gases, and factory air that are used in production processes and testing devices. Applications include: Air, Nitrogen, Argon, other inert gases, Oxygen*, Carbon Dioxide, Natural Gas (13A), Methane, Propane, Butane, mixed gases, and gases outside the explosion limits. Gas must be clean and dry, without corrosive components such as chlorine, sulfur and acid, etc. Corrosive gases cannot be measured. Low tolerance for foreign matter deposits (filter installation required). IP67 waterproof structure for outdoor applications.
*Only degreased models can be used for oxygen.
Included Products
MVF0500CUG0110000
$5,728.00
MVF0500CUG0115000
$5,728.00
MVF0501CAG0110000
$5,728.00
MVF0803CAG0110000
$6,600.00
MVF1003CAN0110000
$7,800.00
MVF1503CAN0110000
$9,120.00
Details
Azbil MVF□□□□□□□011□□□0 series of Micro Flow Vortex Gas Flowmeter incorporates a µF (Micro Flow) sensor made by silicon micro-machining and thin film technologies. Because a high-sensitivity, quick response sensor that is a mere 1.7 mm square and 0.5 mm thick is used for the detection of the vortex frequency, a wide measurement range of 100:1 has been achieved. Since this flowmeter covers such a wide measurement range in the service flow range, they can be used for popes with unknown rate, without worrying about selecting a suitable model. Since Temperature and pressure compensation functions are integrated, there is no need to use temperature and pressure sensors and compensation devices, thus reducing the cost of ownership. Comprehensive interfaces such as 4 to 20 mA instantaneous flow rate output, pulse output for totalization communications functions (RS-485 communication), etc. are integrated as standard functions. Therefore this device can be used in combination with a wide variety of external devices. The instantaneous flow rate / total flow display enables easy confirmation of these values at the work site. IP67 structure for outdoor applications, CE marked.