Digital Pressure Detectors Intelligent Pressure Sensor and Switch
Digital Pressure Detectors Intelligent Pressure Sensor and Switch
SKU
SPS300A/B
UOM
Each
Azbil SPS300A/B are general purpose intelligent pressure sensors and switches that can be used in range of applications. Applications include tire manufacturing.
Included Products
SPS300A200A110
SPS300A200A110
$1,128.00
SPS300A202A11T
SPS300A202A11T
$1,368.00
SPS300A202A21T
SPS300A202A21T
$1,368.00
SPS300A203A21D
SPS300A203A21D
$1,188.00
SPS300A205A110
SPS300A205A110
$1,128.00
SPS300A205A11T
SPS300A205A11T
$1,368.00
SPS300A205A21T
SPS300A205A21T
$1,368.00
SPS300A205B210
SPS300A205B210
$1,142.00
SPS300A805A210
SPS300A805A210
$1,128.00
SPS300A911A110
SPS300A911A110
$1,128.00
SPS300A911A11D
SPS300A911A11D
$1,188.00
SPS300B207A21T
SPS300B207A21T
$1,296.00
SPS300B903A110
SPS300B903A110
$1,056.00
Details
Azbil SPS300A/B Intelligent Pressure Sensors and Switches are microprocessor-based high accuracy and high function digital pressure detectors. Accuracy is ± 0.25% FS with a high speed response of 50 ms (63% response). The units have a high reliability of more than one million pressure-cycle mechanical life. Liquid-filled dual diaphragms (316L stainless steel) and a semiconductor-based pressure detection element are incorporated into the pressure detection unit. These detectors are used for gauge pressure measurements. SPS300A is a pressure sensor with current output and relay contacts. SPS300B is a pressure switch which offers two-stage relay contact (independent) outputs. The structure is rainproof*. Key operation and high visibility large digital indication. Smart functions ensure applicability to a wide range of sites: PV bias adjustable, adjustable indication figure, adjustable filter constant, keylock, adjustable hi-lo relay action, manual output setting possible, peak hold and output scaling. The SPS300A must be mounted vertically. Different mounting orientation might cause measurement errors.
*If rain-proofing is required, seal the conduit hole with a water proof conduit and tighten the front cover firmly after wiring.