Sensors - Digital Pressure Detection Intelligent Pressure Sensor - Pressure Range Code 203, 0 to 1000 kPa measuring range, -100 to +1100 kPa indication and setting range, wall-mount, 120/240 VAC 50 to 60 Hz power supply, current & relay contact (SPDT) output type. Output rating: current value 4 to 20 mA, external load resistance Ω max, adjustable scaling setting is possible, relay contact SP1 250 VAC 3A resistive load. With data sheet.
Azbil SPS300A Intelligent Pressure Sensors are microprocessor-based high accuracy and high function digital pressure detectors. Accuracy is ± 0.25% FS with a high speed response of 50 ms (63% response). The units have a high reliability of more than one million pressure-cycle mechanical life. Liquid-filled dual diaphragms (316L stainless steel) and a semiconductor-based pressure detection element are incorporated into the pressure detection unit. These detectors are used for gauge pressure measurements. The SPS300A is a pressure sensor with current output and relay contacts. The structure is rainproof*. Key operation and high visibility large digital indication. Smart functions ensure applicability to a wide range of sites: PV bias adjustable, adjustable indication figure, adjustable filter constant, keylock, adjustable hi-lo relay action, manual output setting possible, peak hold and output scaling. The SPS300A must be mounted vertically. Different mounting orientation might cause measurement errors.
*If rain-proofing is required, seal the conduit hole with a water proof conduit and tighten the front cover firmly after wiring.