SKU: 81446594-005
Gas Flow Measurement and Control Products - Micro Flow Sensor Applied Products - Accessories - Harness with special connector - Without RS-485 communications - Harness length 2 m
SKU: MCF
Azbil MCF Air Flow Meters are indispensable for cutting compressor energy use when using compressed air and nitrogen - (1) Minimize leakage - Substantial reduction of air leakage occurs by determining the leakage quantity and repairing the leakage. (2) Manage costs for production line or for an entire department. - Knowing the total flow quantity and cost for an area and budgeting that area increases cost consciousness and enable measurement of cost reduction efforts. (3) Reduce waste - The quantity used by equipment can be checked to know if its appropriate, waste can be reduced by restricting the air supply to an appropriate quantity. Gas must be clean and dry, without corrosive components such as chlorine, sulfur and acid, and without dust or oil mist. No need for a straight pipe section with low pressure loss (models with built in flow rectifier). Corrosive gases cannot be measured. Low tolerance for foreign matter deposits (filter installation required).
SKU: MCS100
Azbil MCS100 Air Mass Flow Sensor series is appropriate for applications where there are frequent changes in fluid condition (temperature, supply pressure, or altitude). MCS Flow Sensors can be used for (1) Control of suction flow rate in gas detectors, air samplers etc. (2) Control or monitoring of supply flow rate for oxygen concentrators, etc. (3) Monitoring purge or cooling flow rate for wire bonders, etc. (4) Pick-up and placement detection of miniature electronic or optical devices. Applicable gases include: Air, Nitrogen and Oxygen*. Gas must be clean and dry, without corrosive components such as chlorine, sulfur and acid, and without dust or oil mist. Corrosive gases cannot be measured. Low tolerance for foreign matter deposits (filter installation required). *Fluid conditions for use with oxygen: supply pressure 50 kPa or less, concentration 95%.
SKU: CMG150A004100100
Gas Flow Measurement and Control Products - Micro Flow Sensor Applied Products - Gas Flow Monitor for Natural Gas and Air CMG series - connection 15 A (1/2" B), pipe shape: Rc thread, gas type: air, flow rate range: 0.50 - 4.00 m3/h (CMG15), output: 4 - 20 mA + Event Output 2, pressure: low pressure, operating pressure: 100 kPa max., pressure resistance: 150 kPa max., no communications, power: 100 Vac (50/60 Hz), additional processing: none.
SKU: CMG150G004000100
Gas Flow Measurement and Control Products - Micro Flow Sensor Applied Products - Gas Flow Monitor for Natural Gas and Air CMG series - connection 15 A (1/2" B), pipe shape: Rc thread, gas type: natural gas 13A-46MJ (gas composition compensation coefficient: 1.029), flow rate range: 0.50 - 4.00 m3/h (CMG15), output: 1 - 5 Vdc output (4, 10, 30 m3/h only), pressure: low pressure, operating pressure: 100 kPa max., pressure resistance: 150 kPa max., no communications, power: 100 Vac (50/60 Hz), additional processing: none.
SKU: CMG150N004000000
Gas Flow Measurement and Control Products - Micro Flow Sensor Applied Products - Gas Flow Monitor for Natural Gas and Air CMG series - connection 15 A (1/2" B), pipe shape: Rc thread, gas type: natural gas (13A-46MJ), flow rate range: 0.50 - 4.00 m3/h (CMG15), output: 1 - 5 Vdc output (4, 10, 30 m3/h only), pressure: low pressure, operating pressure: 100 kPa max., pressure resistance: 150 kPa max., no communications, power: 24 Vdc, additional processing: none.
SKU: CMG150N004000100
Gas Flow Measurement and Control Products - Micro Flow Sensor Applied Products - Gas Flow Monitor for Natural Gas and Air CMG series - connection 15 A (1/2" B), pipe shape: Rc thread, gas type: natural gas (13A-46MJ), flow rate range: 0.50 - 4.00 m3/h (CMG15), output: 1 - 5 Vdc output (4, 10, 30 m3/h only), pressure: low pressure, operating pressure: 100 kPa max., pressure resistance: 150 kPa max., no communications, power: 100 Vac (50/60 Hz), additional processing: none.
SKU: CMG150N0041000D0
Gas Flow Measurement and Control Products - Micro Flow Sensor Applied Products - Gas Flow Monitor for Natural Gas and Air CMG series - connection 15 A (1/2" B), pipe shape: Rc thread, gas type: natural gas (13A-46MJ), flow rate range: 0.50 - 4.00 m3/h (CMG15), output: 4 - 20 mA + Event Output 2, pressure: low pressure, operating pressure: 100 kPa max., pressure resistance: 150 kPa max., no communications, power: 24 Vdc, additional processing: with inspection report.